French Rods Configuration Tool
Everything you need to customize a beautiful French Rod
This wizard will effortlessly guide you through configuring exactly what you need.
Everything you need
Fast & Effortless
Menagerie French Return Rods are customizable and feature strong 2mm thick steel rods, continuous through custom bend returns, and are scratch resistant via a powder coated finish.
Please note that all custom products may take up to 14 to 21 business days to produce.
- This configuration tool will allow you to specify exactly how you want your french rod configured.
- This tool will guide you, ensuring that your selections are fully compatible.
- Throughout the configuration, additional information is provided to help your decision making process.
- Your selections are always saved, even if you navigate away from this page or come back later.
- As always, if you need help, our support team is just a click away.
Step 1 - Rod Configuration
Select Finish
Simple elegance of French Rods in 5 powder coated finishes. Ideal for indoor & outdoor use.
Diameter
You may select 5/8”, 7/8” or 1- 1/4” diameter rods.
Rod Length
This is your face width. Measure as if you were measuring for an outside mount curtain rod. The outside edge of each side (right & left), of the French Rod will return to the wall at the length that you submit.
This is your face width. Measure as if you were measuring for an outside mount curtain rod. The outside edge of each side (right & left), of the French Rod will return to the wall at the length that you submit.
If you would like the sections of your rod to be cut in unequal sections that are less than eight feet, please use the box above to tell us how long you want us to cut each splice section.
Ron Connectors
Used anywhere there is a splice to connect two sections of FR-ROD. All hardware included.
You must fix errors before proceeding
Step 2 - Returns
Return Type
All returns are cut to 3-1/2” unless a custom return has been selected. The return type is the angle of the bend and the return distance to the wall. Our standard bend is 90 degrees. All return bends come with a decorative wall mounting plate, a set screw and an allen wrench.
Standard Return
Standard return distance of 3-1/2" with a 90 degree bend.
Custom Return and/or Custom Bend
Any length greater or less than 3-1/2” return with a 90 degree bend.
Straight Rod (No Returns)
Brackets must be ordered separately.
You must fix errors before proceeding
Step 3 - Rings
Drapery Ring Options
Select drapery ring quantity. Rings are recommended 3 per ft.
5/8" Ring for French Rod Size 1-1/4" Diameter Sold as Each 7/8" Ring for French Rod Size 2" Diameter Sold as Each 1-1/4" Ring for French Rod Size 2-1/2" Diameter Sold as Each
7/8" Passing Ring for French Rod Size 2” Diameter (ONLY AVAILABLE IN 7/8") Sold as Each
Step 4 - Brackets
Brackets
It is recommended to add Support brackets every 5 feet for 5/8" French Rods It is recommended to add Support brackets every 6 feet for 7/8" French Rods It is recommended to add Support brackets every 7 feet for 1-1/4" French Rods
Custom Ceiling Mount Bracket (FR-CMBRKT-58)
Custom drop acceptable values: 1/2 inch to 6 inches. Custom drop acceptable values: 1/2 inch to 6 inches. Custom drop acceptable values: 1/2 inch to 6 inches.
It is recommended to add Support brackets every 5 feet for 5/8" French Rods. It is recommended to add Support brackets every 6 feet for 7/8" French Rods. It is recommended to add Support brackets every 7 feet for 1-1/4" French Rods.
It is recommended to add Support brackets every 5 feet for 5/8" French Rods It is recommended to add Support brackets every 6 feet for 7/8" French Rods It is recommended to add Support brackets every 7 feet for 1-1/4" French Rods
It is recommended to add Support brackets every 5 feet for 5/8" French Rods It is recommended to add Support brackets every 6 feet for 7/8" French Rods It is recommended to add Support brackets every 7 feet for 1-1/4" French Rods
It is recommended to add Support brackets every 5 feet for 5/8" French Rods. It is recommended to add Support brackets every 6 feet for 7/8" French Rods. It is recommended to add Support brackets every 7 feet for 1-1/4" French Rods.
For mounting on the inside of a window frame.
You must fix errors before proceeding
Step 5 - Batons
Baton Options
Acrylic Baton
Clear only.
Fiberglass Baton
White only.
Metal Baton
Available in 4 powder coated finishes.
You must fix errors before proceeding
Step 6 - Review Configuration
Review Your French Rod Configuration
Please review the options you have selected for your French Rod below. If a correction is necessary, go back to previous steps using the navigation above.
Rod Finish, Style & Length
- Finish:
- Style:
- Length: inches
Return Type
- Type:
- Number of Returns:
- Return Side:
- Return Length: inches
Baton
- Type:
- Finish:
- Quantity:
- Length:
Drapery Rings
- Type:
- Quantity:
Review Brackets
Custom brackets will be built with the custom return length specified above.
A Few Important Notes:
- Professional installation of our products is recommended.
- This is a custom fabricated product, and as such shipping may take up to 14 to 21 business days after ordering.
